Manufacturers of Industrial Ovens, Washers and Industrial Finishing Systems
Conveyor Ovens
Conveyor Ovens
Industrial Conveyor Curing Ovens
Industrial Curing Ovens are known by various names in different industries. Sometimes referred to as Baking Ovens or even Dryers, Curing Ovens are typically used for the thermal cross-linking of coatings and adhesives. INFRATROL Curing Ovens are designed and built to your specific requirements for part size, production rate and thermal characteristics. Types of Industrial Curing Ovens include:
- Decorative Metal Cure Oven
- Epoxy Oven / Epoxy Curing Oven
- Plastisol Cure Oven
- Clean Heat Oven
- Rubber Shock Oven
- Wood Coating Ovens, Wood Curing Ovens, and Paint Finishing Ovens
- Skinning Oven
- Pharmaceutical Curing Ovens
Below is just a sampling of some of the Belt Curing Ovens we have built.
Electric Heated Curing Oven
Electric Heated Curing Oven
Electrically Heated Curing Oven with Ambient Cooling Section. For curing epoxy on printed circuit boards. Boards are transported through the oven and cooler on a variable speed flat wire conveyor belt.
Curing Oven Reference # 7116
Extruded Rubber Curing Belt Ovens
Extruded Rubber Curing Belt Ovens
Gas Fired 40 ft. Curing Oven to Cure a Continuous Strip of Extruded Rubber. Rubber curing oven has TCFG Non-Stick Conveyor Belt, Air Operated Top Opening Access Doors, with Variable Speed Drive with 250°F to 600°F operating temperature range.
Curing Oven Reference # 6950
Ink Curing Oven
Ink Curing Oven
Gas fired multi-zone curing oven used to cure inks on aluminum sheets. Ink curing oven has an ambient cooling zone, installed after the curing oven to cool the sheets to ambient prior to stacking. Our curing oven has a 48” wide fabric belt with variable speed drive along with independent temperature control for each zone.
Curing Oven Reference # 6704
Adhesive Curing Oven &
Slat Conveyor Curing Oven
Adhesive Curing Oven & Slat Conveyor Curing Oven
Gas fired adhesive curing oven on an automotive air bag component. Parts are conveyed through the oven zone on a slat conveyor and are return to the entrance end through an ambient cooling section.
Curing Ovens Reference # 6681
Adhesive Curing Indexing Oven
& Slat Conveyor Curing Oven
Adhesive Curing Indexing Oven & Slat Conveyor Curing Oven
Gas Fired Curing Oven with Cooling Zone to cure an adhesive on an automotive part. Oven has a special indexing slat conveyor to hold 8 parts per slat to transport the parts through the heat zone and the cooling zone.
Curing Ovens Reference # 7341
Vertical Curing Ovens
(Gimbaled Conveyor Ovens)
Vertical Curing Ovens (Gimbaled Conveyor Ovens)
Electrically Heated Vertical curing oven with Gimbaled Conveyor for a curing operation on an automotive part. Parts are loaded/unloaded from same end for one man operation and had automatic indexing conveyor with light curtain installed at the load/unload area.
Curing Ovens Reference # 6480
Epoxy Curing Oven
Epoxy Curing Oven
Electrically Heated Vertical Batch Curing Oven to cure epoxy on large rolls. Oven has 45 ft. high inside clear working dimension with air operated swing doors and work platforms for access to parts and for servicing.
Curing Ovens Reference # 7066
Computer Chip Monorail Curing Oven
Computer Chip Monorail Curing Oven
Electrically heated curing oven for the post mold bake of computer chips. Parts are loaded into magazines which are hung from an indexing overhead monorail conveyor system which transports them through a pre-heat zone, cure zone and cooling zone.
Curing Ovens Reference # 7017
Electrically Heated Two-Zone
Monorail Curing Ovens
Electrically Heated Two-Zone Monorail Curing Ovens
Electrically heated, two-zone oven with power and free, overhead monorail conveyor, used for heating automotive parts. Oven has air operated, horizontal opening doors at each end and between the zones. Zone one has two index stations and zone two has one index station with independent temperature control for each zone. Entire system was fully operational prior to shipping.
Curing Ovens Reference # 6787
Gas-Fired Monorail Curing Oven
Gas-Fired Monorail Curing Oven
Gas fired monorail curing oven for radiator core bonding. Oven incorporates a blow-off section at the oven entrance and a cooling zone at the oven exit. The oven was constructed of 316L stainless steel and was designed for a maximum of 800°F
Curing Ovens Reference # 6286
Contact us about our Conveyor Curing Ovens by clicking here.